Metal band saw
This metal band saw I bought from auction mainly for cutting turned pieces (hard to cut in small lathe), but it has proven useful for other thing too, like when I did the hydraulic press.

The motor heats up very heavily, so I did place an extra blower for motor.
Saw can cut from 45 to 90 degrees and max round piece is 90 mm (90°) and 65 mm (45°), or 90x120 mm (90°) and 70x65 mm (45°).

Weight with table (what I have not used) is 35 kg.
I did a small table and screwed it to band guide.
Now I can cut small pieces like in table metal band saw.
Works fine with pieces like the crank arm from 4,5 mm thick brass sheet.